Embedding Accessories
Electron Microscopy Sciences T-Sue™ Precast Paraffin Block, 1.5 mm
Precast T-Sue Microarray paraffin blocks are used to construct a tissue array block in minutes by simply punching the donor tissue cores and inserting into a pre-made paraffin recipient block. It is an easy, convenient, and low cost method for constructing paraffin tissue microarrays. The blocks are made of paraffin and the cassettes are made of acetal. The cassette is permanently bonded to the block and has consistent core diameters. It is ready to accept cores from the donor block.
Kit includes 6 Precast T-Sue Paraffin blocks and two punch needles with stylet.
Size: 1.5 mm
Capacity: 72 cores
Electron Microscopy Sciences T-Sue™ Precast Paraffin Block, 2 mm
Precast T-Sue Microarray paraffin blocks are used to construct a tissue array block in minutes by simply punching the donor tissue cores and inserting into a pre-made paraffin recipient block. It is an easy, convenient, and low cost method for constructing paraffin tissue microarrays. The blocks are made of paraffin and the cassettes are made of acetal. The cassette is permanently bonded to the block and has consistent core diameters. It is ready to accept cores from the donor block.
Kit includes 6 Precast T-Sue Paraffin blocks and two punch needles with stylet.
Size: 2 mm
Capacity: 60 cores
Electron Microscopy Sciences T-Sue™ Microarray Mold Kit, 4 mm
T-Sue array molds are specifically designed to be simple, easy to use and inexpensive. The tissues can be analyzed in consistent conditions enhancing the efficiency of the research. Allow you to perform TMAs more quickly with excellent results. By using array molds, you can process up to 170 specimens onto one single slide in very little time.
Made of silicone, these molds can withstand temperatures between -100 deg C to +250 deg C and be reused hundreds of times without losing their flexibility.
Each kit includes one T-Sue array mold and four punch needles with stylet.
Size: 4 mm
Capacity: 15 cores
Electron Microscopy Sciences For use with the Tissue-Tek CRYO3 Microtome/Cryostat Cryo 2000™, these plastic Cryomold specimen holders have round shapes and a tab for easy handling.
For use with the Tissue-Tek CRYO3 Microtome/Cryostat Cryo 2000™, these plastic Cryomold specimen holders have round shapes and a tab for easy handling.
Electron Microscopy Sciences Disposable Base Mold, 24 x 24 mm, 5 mm height
Our Disposable Base Mold is designed to fit all existing cassettes. Because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals.
Size: 24 x 24 mm
Height: 5 mm
Electron Microscopy Sciences Paraffin TMA Arraymold Kit 1 (A +B), 2.0 and 1.5 mm diameter
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) with less time while maintaining excellent results. Process up to 150 specimens onto one single slide with very little time consuming, minimal technical training. The DVD instruction is accompanying with each kit, will step by step guide you to perform through the entire TMAs process.
Arraymolds allow pathologist or researcher to view many different samples on the same single slide.
Helpful in finding IHC markers for control or quality assurance from hundreds of samples.
Staining markers will be more consistent when hundreds of samples are on one slide.
Used less costly antibody.
Arraymold kit is small enough to be stored in a drawer.
Rubber arraymold can be reused many times without losing its flexibility. This package includes two Arraymold kits, Kit A and Kit B.
Diameter: 2.0 and 1.5 mm
Ted Pella Inc DISPOSABLE BASE MOLDS
Disposable Base Molds, 37 x 24 x 10mm, Offer ease and convenience of operation, Excellent thermal exchange, Smooth interior finish
Electron Microscopy Sciences Peel Away Disposable Embedding Mold Rectangular, 22 x 30 mm
Peel Away Disposable Embedding Molds are used for plastic or paraffin embedding. No block trimming needed. Inside fingers hold ID slip which becomes embedded in the block for positive permanent identification.
Size: 22 x 30 mm
Leica Biosystems BULK B PAD 1X1.25 BLU 10000/CS
Biopsy Pads are made from open-celled foam, which allows fluids to transfer safely and thoroughly around tissue while holding the specimen securely. To prevent floating and avoid artifacts, Biopsy Pads should be presaturated in fixative. The thin design helps eliminate excess pressure from being applied to unfixed specimens, reducing the risk of tissue sticking to the pads or fibers coming apart during embedding. Available in white or blue foam, circular or rectangular. The thinner pads also allow for less fluid carry-over during processing.
Alkali Scientific Disposable Base Molds for Histology & Tissue Embedding, 500/Case, 25x40x5mm
Disposable Base Molds are designed for reliable and consistent paraffin embedding in histology and pathology laboratories. Manufactured from high quality plastic, these molds feature uniform wall thickness and precise dimensions that help maintain optimal tissue orientation and reproducible paraffin block formation during embedding procedures. The smooth interior surface allows easy paraffin release, minimizing block distortion and reducing the risk of tissue damage during removal. Disposable construction eliminates cleaning and reuse, helping laboratories improve workflow efficiency while reducing the potential for cross contamination. Compatible with standard embedding rings and tissue cassettes, these base molds support routine histology, pathology diagnostics, biomedical research, and educational laboratory applications.
Alkali Scientific Metal (Stainless Steel) Histology Embedding Base Molds for Histology & Tissue Embedding, Reusable, Polished, 24x24x7mm, 200/Case
These reusable stainless steel histology base molds are designed for embedding biopsy and tissue specimens during routine histological processing. Manufactured from durable, rust resistant stainless steel, the molds provide excellent thermal conductivity for efficient and uniform paraffin embedding. Extended winged sidewalls create a stable flat bottom profile that resists tipping while offering a secure gripping surface for safe and convenient handling. The polished interior surfaces allow smooth paraffin release and simplify cleaning between uses. These molds are compatible with standard embedding cassettes and are suitable for holding paraffin and tissue samples across a wide range of laboratory workflows. Available in multiple well dimensions to accommodate different specimen s and orientations, providing consistent performance in histology laboratories.
Electron Microscopy Sciences Disposable Base Mold for Macrocassettes
Made from PVC with excellent thermal exchange. Specially designed for the Macro-Cassette above. It has a smooth interior finish and rounded corners to facilitate its removal. Will resist temperatures from –80 degree C to 60 degree C. Not to be used with xylene or acetone. Measures: 37 x 24 x 10 mm, and 5 ml volume.